Shaded Pole Motor 26/18 Series(multi-function design)

　　Foot mounting: Track dimension 26mm or 18 mm possible

　　Type of protection: IP42 or IP44

　　Electrical connection: Jacketed cable 3x0.5 m㎡ with brass lead tips

　　Product conforming to standard: CE

　　Approvals: VDE( except 3W),CCC

Valid For All Design:

　　—Material: Housing made of die-cast aluminium

　　Stator pack: coated in black

　　—Direction of air flow: "S"or "B"(depending on axial impeller used)

　　—Direction of rotation: clockwise(or counterclockwise), seen on shaft end

　　—Insulation class: B

　　—Mounting position: Any, preferrably horizontal

　　—Condensate discharges: None

　　—Mode of operation: Continuous operation (S1)

　　—Bearings: self-adjusting calotte sleeve bearing(mean service life of 30,000 hours in horizontal installations position)

　　—Motor protection: impedance switched ( combination D-H)

　　—Mounting: guard grille and wall ring are mounted onto the protruding thread ends of theA side.The Q-motor can also be screwed on via the mounting flanges (integrated in the bearing shields).

　　—Axial impeller mounting: Mounted to the motor shaft using a plastic adapter with pulling peg and an M4 screw(combination A-D) OR M5 (combination E-H) screw.

　　Power specifications: At 60Hz, the blade angle of the axial impellers must be reduced 6° each.

　　To optimize motors performance, we can also supply our clients with a variety of brackets, rings, fan blades, guard grill,etc.

　　For more information about the voltage, approvals, service life of shaded pole motors, please refer to the summary of shaded pole motors.

1.Performance Parameters

2.Shape And The Size Of Installation